Product Information

Details

Injection Cream is quick and easy to install by a low pressure injection system and is regarded as the new easy way to treat rising damp.

 ▪ Pure Cream Technology Its unique formulation on a pure cream emulsion base means that the Damp Proofing Injection Cream reverts to a liquid phase when injected into the masonry resulting in complete absorption of the product providing superior penetration of the active ingredient within the building material.
▪ Cream Consistency The unique cream consistency allows horizontal application techniques without the injection agent running out. This combined with superior stability in the borehole ensures the optimal penetration of the active ingredient in all directions.
▪ Effective and Safe Protection against Rising Damp Highly effective formulation enables long lasting and deep penetration of the mortar layer creating a horizontal barrier against rising damp
▪ Does not form salts
▪ Universal Use Injection Cream allows the effective treatment of alkaline and pH neutral as well as acidic building materials.
▪ Solvent free (VOC free) Injection Cream is free from VOC (volatile, organic compounds) classified solvents.
▪ Environmentally-friendly Injection Cream is ecologically safe and non-hazardous.
▪ Straight forward Installation Efficient installation by drilling the mortar joint and filling boreholes using a low pressure sprayer or a cartridge gun. No electric DPC pump required.
▪ Controllable and Consistent Consumption Rates The controlled installation technique ensures effective treatment and consistent consumption rates.
▪ Proven Performance Application in practice, independent research and test reports have proved its effectiveness.

Directions for use
Pressure less injection: Drill 12 mm diameter holes horizontally into the mortar joint, in general into the joint intersections, at 120 mm centres and to a depth of 10-20 mm from opposite face. Remove bore dust from the hole and then fill with Injection Cream using a low pressure sprayer or a cartridge gun.

Effect
The capillary active building material causes the injection cream to break into a liquid phase. The silane/siloxane ingredient reacts with water and becomes a polysiloxane. During the reaction process, a silane vapour phase is produced that causes excellent penetration.

Flanking measures
Salt contaminated plasterwork should be renewed. It is important that the re-plastering specification is strictly adhered to and that the plasterer carrying out the work is made aware of the importance of the re-plastering being carried out to specification in conjunction with the insertion of the chemical damp proof course. Please ask for our recommended re-plastering specification.

Tools/Epuipment, Ceaning
a) Drilling equipment, e.g. Helix drill, SDS Plus or SDS Max drill
b) Injection equipment, e.g. Low pressure sprayer or cartridge gun
Clean tools and equipment while the material is fresh with water.