Property Restoration and Renovation Products
Technical Help Line: 0117 938 1596
9am - 5pm Monday - Friday

    Product Information

    Aida DPC Injection Cream 310ml Cartridge

    Rating: 100 / 100

    Availability: In stock

    RRP: £15.00
    Excl. VAT £8.60 Incl. VAT £10.32
    You Save: £6.40
    OR

    Aida DPC Injection Cream 310ml Cartridge

    Quick Overview

    A highly effective cream emulsion on a silane/siloxane base with a unique formulation that allows superior penetration of the active ingredient within the building material which creates a damp proof course.

    A highly effective cream emulsion on a silane/siloxane base with a unique formulation that allows superior penetration of the active ingredient within the building material which creates a damp proof course in walls above ground level where an existing DPC has broken down or an orthodox DPC is missing.
     
    Aida Injection Cream is quick and easy to install by a low pressure injection system and is regarded as the new easy way to treat rising damp.

    When injected into masonry, Aida Injection Cream reverts to a liquid phase resulting in complete absorption of the product providing superior penetration and effective damp proof coursing.

    Pure Cream Technology offers you the following distinct advantages:

    • Superior performance with long lasting deep penetration of active ingredient within the building material.
    • Optimal penetration of the active ingredient allows the usage of lower and more economic concentrations in contrast to commonly available paste products.
    • The unique consistency of pure cream provides superior stability in the borehole ensuring the optimal penetration of the active ingredient in all directions.
    • Ease of application allowing simple loading of application guns or application by low pressure sprayer.

    Application Rates/ Requirements:

    Wall Thickness

    4 1/2"
    (110mm)

    9"
    (220mm)

    13 1/2"
    (330mm)

    18" 
    (440mm)

    Borehole depth 100mm 200mm 310mm 420mm
    Borehole diameter 12mm 12mm 12mm 12mm
    Application rate per 10m wall length 0.9
    litres
    1.9
    litres
    2.9
    litres
    3.9
    litres


    Please note these application rates are for a guide only. Application rates for porous, rubble or highly absorbent masonry may vary.

    As with all Damp Proof Course Injections salt contaminated plasterwork must be renewed. It is important that the re-plastering specification is strictly adhered to and that the plasterer carrying out the work is made aware of the importance of the re-plastering being carried out to specification in conjunction with the insertion of the new chemical damp proof course. Please ask for our recommended re-plastering specification.

    Aida Injection Cream is quick and easy to install by a low pressure injection system and is regarded as the new easy way to treat rising damp.

    • Pure Cream Technology - Its unique formulation on a pure cream emulsion base means that the Damp Proofing Injection Cream reverts to a liquid phase when injected into the masonry resulting in complete absorption of the product providing superior penetration of the active ingredient within the building material.
    • Cream Consistency - The unique cream consistency allows horizontal application techniques without the injection agent running out. This combined with superior stability in the borehole ensures the optimal penetration of the active ingredient in all directions.
    • Effective and Safe Protection against Rising Damp - Highly effective formulation enables long lasting and deep penetration of the mortar layer creating a horizontal barrier against rising damp
    • Does not form salts
      Universal Use - Injection Cream allows the effective treatment of alkaline and pH neutral as well as acidic building materials.
    • Solvent free (VOC free) - Injection Cream is free from VOC (volatile, organic compounds) classified solvents.
    • Environmentally-friendly Injection Cream is ecologically safe and non-hazardous.
    • Straight forward Installation - Efficient installation by drilling the mortar joint and filling boreholes using a low pressure sprayer or a cartridge gun. No electric DPC pump required.
    • Controllable and Consistent Consumption Rates - The controlled installation technique ensures effective treatment and consistent consumption rates.
      Proven Performance Application in practice, independent research and test reports have proved its effectiveness.


    Directions for use

    Pressure less injection: Drill 12 mm diameter holes horizontally into the mortar joint, in general into the joint intersections, at 120 mm centres and to a depth of 10-20 mm from opposite face. Remove bore dust from the hole and then fill with Injection Cream using a low pressure sprayer or a cartridge gun.

    Effect

    The capillary active building material causes the injection cream to break into a liquid phase. The silane/siloxane ingredient reacts with water and becomes a polysiloxane. During the reaction process, a silane vapour phase is produced that causes excellent penetration.

    Flanking measures

    Salt contaminated plasterwork should be renewed. It is important that the re-plastering specification is strictly adhered to and that the plasterer carrying out the work is made aware of the importance of the re-plastering being carried out to specification in conjunction with the insertion of the chemical damp proof course. Please ask for our recommended re-plastering specification.

    Tools/Epuipment, Ceaning

    a) Drilling equipment, e.g. Helix drill, SDS Plus or SDS Max drill
    b) Injection equipment, e.g. Low pressure sprayer or cartridge gun
    Clean tools and equipment while the material is fresh with water.

    You may also be interested in the following product(s)

    Aida Damp Proofing Cream Kit 10 x 310ml

    Aida Damp Proofing Cream Kit 10 x 310ml

    RRP: £153.00
    Excl. VAT £55.00 Incl. VAT £66.00
    You Save: £98.00
    Rating: 87 / 100
    Aida Damp Proofing Cream 1 Litre Cartridge

    Aida Damp Proofing Cream 1 Litre Cartridge

    RRP: £42.50
    Excl. VAT £13.95 Incl. VAT £16.74
    You Save: £28.55
    Rating: 100 / 100
    4 x Aida Injection Cream 1 Litre Cartridge + Pro Gun & Nozzle

    4 x Aida Injection Cream 1 Litre Cartridge + Pro Gun & Nozzle

    RRP: £218.00
    Excl. VAT £68.00 Incl. VAT £81.60
    You Save: £150.00
    Rating: 82 / 100

    Additional Information

    Manufacturer: Permagard
    Dillution: ready to use
    Size: 310ml cartridge
    Coverage: up to 3 linear metres of 110mm thick wall
    Model: DPA310
    Packaging: Individually
    Country of Manufacture: Germany