Need Help? Call us on...
0117 9381 596
Order Online or by Phone
Next Day Delivery
Approved Contractors
We're Here to Help
Delivery
NEXT DAY DELIVERY
When you order before 1pm
Fast and Reliable Delivery
anywhere across the UK
from our Bristol based office
We accept
Safe, Secure Payments
MEMBER ASSOCIATIONS
Follow Us
Quick Overview
Details
Anti Mould Paint is an excellent, premium quality, low odour anti mould coating guaranteed to protect against unsightly and unhygienic black mould even when there is persistent condensation. The unsurpassed performance of the Anti Mould Paint is achieved by combining modern paint technology with highly advanced, proven biocides. The anti mould biocide within the Anti Mould Paint is combined throughout the paint film, which is formulated to impart toughness, elasticity, water resistance and durability to the finish.
Anti Mould Paint is ideal for walls and ceilings in private and social housing and a wide range of public and commercial buildings. It is fully washable and resistant to the effects of condensation when the coating is fully dried out.
Anti Mould Paint Properties
- Guaranteed for a minimum of FIVE YEARS to prevent the recurrence of Black Mould
- Quick drying with no overpainting problems; compatible with all known paint finishes
- Approved under HSE Control of Pesticides 1986 Regulations as a surface biocide treatment against mould growth
- Easy to use and cost effective
Preparation is straight forward and very similar to normal good decorative practice:
Preparation
- Remove any loose material such as old paint, grease, dirt, mould or defective wallpaper. After dilution Mould Wash Concentrate can be used for "wetting in" purposes when removing wallpaper.
- Make good any defects in the surface and rub down to a smooth finish.
- Wash and clean all surfaces (walls, ceilings, window frames and joinery) using diluted Mould Wash Concentrate. If necessary clean badly affected areas a second time.
- Allow to dry thoroughly.
- If necessary, apply an appropriate primer or sealer to new, unprimed or porous plaster and wooden surfaces or bare metal.
- For new or porous plaster surfaces use Anti mould paint thinned up to 10% with clean tap water as normal good practice. Allow to dry thoroughly.
Application of Anti Mould Paint
- Apply Anti mould paint using brush or roller.
- STIR THOROUGHLY BEFORE USE.
- Apply two coats Anti mould paint allowing sufficient drying time between coats.
- Clean equipment with clean tap water before the paint dries.
- Anti mould paint must not be covered with any other paint or wallpaper.
- If an unfinished, textured wallpaper (blown vinyl, woodchip) or similar is to be used then it should be hung after the Mould Wash Concentrate has fully dried. The wallpaper should be coated with Anti mould paint as above.
Product Information
Coverage: 10-12 m2 per litre but an extra allowance should be made for rough or porous surfaces.
Drying Time: Touch dry in 1 hour and recoatable after 2-4 hours dependent on conditions.
Thinning: Use clean tap water but do not exceed 10% by volume.
Colours: Brilliant White, Magnolia.
Packaging: 2.5 and 5.0 litres in HPDE containers.
Storage: Store above 5oC in dry conditions. Keep the container tightly sealed and away from children.
Shelf Life: Correctly stored, the unopened product has a shelf life of 12 months.
Health and Safety
The product is approved under the Control of Pesticides Regulations 1986 for use as directed (HSE No. 6308). In use the product is very similar to conventional high quality emulsion paint; refer to Safety Data Sheet (SDS) before using the product.
PRODUCT DATA SHEETS
| Anti Mould Paint Data Sheet (31.3 KB) | |
| Anti Mould Paint Safety Data Sheet (39.2 KB) |
Additional Information
| Dillution: | ready to use product |
|---|---|
| Size: | 5 Litres |
| Coverage: | 10-12 m² per litre but an extra allowance should be made for rough or porous surfaces. |
| Model: | AE |
| Packaging: | individually |
