Newton 503 Lath clear with mesh 20m²

larger image

Price: £106.40

Be the first to review this product

QTY:

Availability: 209 Units in Stock
Model: JNN300L/20
Weight: 10Kgs

Overview

This 3mm membrane is primarily used in damp and water proofing projects where space is an issue. The smaller stud height and ability to fix to the wall makes this membrane a user friendly and fully comprehensible choice.

Description
Technical Details

Newton 503 Lath is a meshed damp proof membrane for use either internally or externally. With its 3mm stud, Newton 503 Lath is just over 3.5mm in overall thickness, and is the preferred meshed damp proof membrane where space is of a premium. Its high quality meshed surface provides an excellent 'key' for lime mortars, renders, plasters or dabbed plasterboard.

The damp proof membrane, Newton 503 has a life expectancy of at least 50 years (DIN 9001:2000). Newton 503 Lath is inert with high pressure stability. It is highly resistant to water, alkalise, saline solutions and organic acids, and is not effected by minerals. It is also resistant to bacteria, fungi and other small organisms.

Width (m)	1.00
Length (m)	20.00
Area (m²)	20.00
Weight (kg)	14.00
Colour	White
Raw Material	High Density Polyethylene
Thickness (mm)	0.50
Stud Height (mm)	3.00
Compressive Strength	200 kN/m²
Vapour Permeability	0.046g/m² x hr x mmHg
Thermal Resistance	0.078m² K/W
Thermal Conductivity	0.461 W/m k
Vicat Softening Temperature	126°C

Associated Newton Membrane Products for Damp Proof Membranes:

Newton Multi Plugs - for fixing the membranes to walls
Newton Newlath Plugs - for fixing the damp proof membranes to walls above ground, seal with mastic
Newton Cob Plugs - for fixing the membranes to poorer quality substrate such as cob walls
Newton Waterseal Rope - for sealing plugs
Newton Waterseal Tape - for sealing membrane joints
Newton Mastic - an alternative to sealing with rope and tape

INTRODUCTION

Newton 503 Mesh is a meshed membrane suitable for use as a damp proof membrane above the ground, either internally or externally, or a waterproofing membrane when used below the ground as part of Newton System 500. With its 3mm stud, Newton 503 Mesh is just 3.5mm in overall thickness, and is the preferred meshed membrane where space is of a premium. Its high quality meshed surface provides an excellent ‘key’ for lime mortars, renders, plasters or dabbed plasterboard. Please see the Newton 503 Mesh Installation Instructions for details on fixing and finishing of the product.

Newton 503 Mesh is guaranteed against deterioration for 30 years, and has a life expectancy of at least 50 years (DIN 9001:2000). It is inert with high compressive loading stability. It is highly resistant to water, alkalies, saline solutions and organic acids, and it is not effected by minerals. It is also resistant to bacteria, fungi and other small organisms.

ASSOCIATED PRODUCTS

Newton MultiPlug - A1 for fixing to walls where 503 Mesh is used as a waterproofing membrane
Newton Newlath Plugs - A16 for fixing to walls where 503 Mesh used as a damp proofing membrane
Newton Newlath Cob Plug - A17 for fixing to poorer quality substrate such as ‘cob walls’ where 503 Mesh used as a damp-proofing membrane
Newton Waterseal Rope - A5 or Tape - A6 for double sided vapour controlled jointing
Newton Mastic - A18 for sealing around protrusions through the Newton 503 Mesh, and for vapour controlled jointing as an alternative to Newton Waterseal Rope and Tape
Newton Profile Strip - A19 provides a stop for Hydraulic Lime, Renders or Plasters for finishing just above the finished floor level

Newton 503 Mesh being installed above ground internally as a damp proofing membrane. Fixed with Newlath plugs at a rate 15 plugs/m² sealed with Newton mastic sealer.