Rubber Tyre Mark Remover 5 Litre

Rubber Tyre Mark Remover is a specialised heavy duty cleaner designed to remove particularly stubborn rubber deposits such as tyre marks from floor surfaces. Rubber Tyre Mark Remover is safe to use on epoxy and UPVC coatings and screeds.

Rubber Tyre Mark Remover is water rinsable and leaves no slippery residues.

Rubber Tyre Mark Remover contains no caustic chemicals, harmful solvents, paraffins or aromatics or chlorinated or brominated hydrocarbons.

Application Rates & Methods

Rubber Tyre Mark Remover is supplied ready to use.

Manual: Sweep floor to remove debris. Apply product to the area to be cleaned with a spray, cloth or mop. Leave for a few minutes and wipe off. If mark does not lift immediately, apply a little more product and leave for 10 to 20 minutes. Clean floor area thoroughly with 2% solution of Industrial Floor Cleaner.

Floor Cleaning Machines: Sweep floor to remove debris. Apply product to the area to be cleaned with a hand held spray or back pack system. Leave for a few minutes. Attach red pads or stiff brushes to a combination scrubber/dryer machine. Charge with a 2% solution of Industrial Floor Cleaner. Make the first pass of the scrubber drier machine without using the vacuum, giving the product additional contact time with the floor. On the second pass, scrub floor and recover soiling as usual.

100ml to 200ml of product should clean an area of approximately 1 sq metre.

Storage & Handling

Shelf Life is 12 months in original container. Protect from frost. Where product has been stored in cold temperatures, leave to reach ambient temperature prior to use. Handle in accordance with good industrial practice: no special precautions with product alone.

Health & Safety

Rubber Tyre Mark Remover should not cause any health and safety issues, when used in accordance with the recommended instructions. More detailed information can be obtained from the appropriate Material Safety Data Sheet.