DPC Injection Cream
A highly effective cream emulsion on a silane/siloxane base with a unique formulation that allows superior penetration of the active ingredient within the building material which creates a damp proof course in walls above ground level where an existing DPC has broken down or an orthodox DPC is missing.
Aida Injection Cream is quick and easy to install by a low pressure injection system and is regarded as the new easy way to treat rising damp.
When injected into masonry, Aida Injection Cream reverts to a liquid phase resulting in complete absorption of the product providing superior penetration and effective damp proof coursing.
Using DPC Injection Cream
Drill 12 mm diameter holes horizontally into the mortar joint, in general into the joint intersections at 120mm centres and to a depth of 10-20mm from opposite face. Remove bore dust from the hole and then fill with Injection Cream using a low pressure sprayer or a cartridge gun.
Application Rates/ Requirements:
Borehole depth 100mm 200mm 310mm 420mm Borehole diameter 12mm 12mm 12mm 12mm Application rate per 10m wall length 0.9
Please note these application rates are for a guide only. Application rates for porous, rubble or highly absorbent masonry may vary.
As with all Damp Proof Course Injections salt contaminated plasterwork must be renewed. It is important that the re-plastering specification is strictly adhered to and that the plasterer carrying out the work is made aware of the importance of the re-plastering being carried out to specification in conjunction with the insertion of the new chemical damp proof course. Please ask for our recommended re-plastering specification.
Read our how to guide on re-rendering after the installation of a new dpc.
- Superior performance with long lasting deep penetration of active ingredient within the building material.
- Optimal penetration of the active ingredient allows the usage of lower and more economic concentrations in contrast to commonly available paste products.
- The unique consistency of pure cream provides superior stability in the borehole ensuring the optimal penetration of the active ingredient in all directions.
- Ease of application allowing simple loading of application guns or application by low pressure sprayer.
Model: DPA5 SKU DPA5 Manufacturer: Remmers Packaging: Individually Size: 5 litres Dilution: ready to use Coverage: up to 50 linear metres of 110mm thick wall Country of Manufacture: Germany
Good product. Change the tub!!Good product value for money.
Shame about the new tub nightmare to open and messy transfer into applicator vessel.
Quality Price Value
Simple and QuickI agree with Toby, very easy to install. Much cheaper than other online retailers.
Quality Price Value
very quick to installVery easy to install in combination with the 5 litre injection unit, quicker than 1 litre cartridges and works out a bit cheaper.
Price Value Quality
Other Products You May Be Interested In
RRP £300.00 Ex VAT£120.00 Ex VAT £144.00 Inc VAT
RRP £395.00 Ex VAT£163.00 Ex VAT £195.60 Inc VAT