Stick 2 Epoxy Putty Aqua 50gm

Epoxy Putty for Underwater repairs

Everbuild Stick 2 Epoxy Putty Aqua is a two component epoxy putty for permanent repairs to damp, wet and underwater areas. It can be used for repairing, bonding, sealing, fixing, remoulding and rebuilding virtually any material (with limitations). It can be applied underwater, both fresh and salt, and will bond to substrates such as fibreglass, metal, wood, concrete, ceramic, glass etc. The putty can be mixed in just one minute and is totally waterproof once dry.

Application of Epoxy Putty

We always recommend wearing gloves when handling the epoxy putty.

Surfaces must be clean, sound and free of oil and grease. Smooth surfaces should be abraded. Break off the required amount of EPOXY PUTTY AQUA and mix by hand to a uniform colour. Apply to required areas immediately. Fill all voids and holes, apply pressure on damp, wet or slowly leaking surfaces. For a smooth appearance, handrub with water or a damp cloth prior to hardening. Allow to fully cure before sanding or machining.

Working time from mixing – 5 minutes @ 20oC

Curing time – 60 minutes @ 20oC