PermaSEAL Quick Plugs are used to secure PermaSEAL System membranes to brick, concrete, stone and other masonry surfaces. They are supplied with a rubber grommet so that when the plug is fixed into the substrate the grommet creates a compression seal against the membrane to stop any water ingress.
The PermaSEAL Quick Plug also has a preformed hole in the head of plug allowing battens or tracking systems to be secured to it via a size 10 screw.
These membrane Plugs are designed to give a rapid fix into varying substrates. It can be installed into either 10mm or 11 mm holes depending on the substrate.
Installing Brick Plugs
Installation is quick and easy, simply drill a 10mm or 11mm hole (depending on the substrate) to a depth of 70mm. Then put the PermaSEAL Quick Plug into the hole and use a large head hammer to gently drive the plug in. Make certain that a good even seal is achieved.
PermaSEAL BBA approved waterproofing system
Our PermaSEAL waterproofing system has BBA approval, awarded by the UK’s leading building product certification body. Independent, expert-led and trusted by professionals, BBA certificates are a symbol of quality within the construction industry. You can use our PermaSEAL 8 and 20 membranes and related products safe in the knowledge they have been independently tested to ensure the highest quality levels.
- Part of the PermaSEAL BBA Approved Waterproofing System
- Provides a rapid fix into a variety of substrates
- Rubber grommet provides a compression seal stopping water ingress
- Easy to install
|Packaging:||bag of 100|
|Size:||10mm x 70mm|
|Coverage:||Clear Membrane @ 5 per m², Mesh Membrane @ 15 per m²|
|Country of Manufacture:||United Kingdom|
Need more information?
- PermaSEAL Membrane Ancillaries Data Sheet (313.3 KB)