Platon P20 Waterproof Floor Membrane 40m²
Platon Floor Membrane
Platon P20 is a high capacity drainage membrane recommended for use on all floor applications below ground, due to its ability to control free flowing water. With a high drainage capacity, P20 is ideal for basement floors. The deep stud profile is designed to provide a large water capacity per square metre. This minimises potential blockages caused by lime deposits. Anti-Lime Coatings must be used as a dressing on concrete or concrete-filled blockwork.
Platon P20 floor membrane is manufactured from black high-density polyethylene (HDPE). It is impermeable to water, water vapour, Radon gas. It is also resistant to the chemicals and materials commonly used in building construction.
When the P20 is used as a damp proofing or waterproof membrane, it may be installed independent of the moisture content in the underlying concrete construction. Any water running over the substrate has de-pressurized into the air gap under the membrane. Studs are formed in a regular pattern on one face of the membrane. The studs are spaced at approximately 60mm centres and are 20mm deep.
In accordance with NBS Specification J40 (clause 290) – Flexible Sheet Tanking/Damp Proofing.
- BBA approved
- Heavy duty, deep studded HDPE cavity drain membrane
- Principally used on floors
- For areas subject to high volume water penetration
- Impermeable to water, gas and water vapour
|Size:||2.0m x 20m x 20mm|
Certification No: 01/3823
Approved by the British Board of Agreement
|Country of Manufacture:||United Kingdom|