Epoxy Garage Floor Paint Kit 20m²
Transform your new or existing garage, workshop or man cave floor with our complete, easy-to-use epoxy flooring kit.
Epoxy Floor Coating Kit for Garages, Workshops and Industrial Floors
Our epoxy floor kits contain all you need to create an attractive and durable new epoxy floor. The kits are based around our high quality epoxy resin floor coatings that create a hard-wearing and attractive finish.
You can install an epoxy floor in a wide range of areas – it is particularly popular in garages, workshops, man caves and industrial spaces. One of the reasons for this is the show room high gloss final appearance and how easy it is to clean.
The epoxy floor coatings can be applied onto new concrete and existing concrete. With the correct primer, it's also suitable for damp, friable or contaminated concrete. Please speak with our technical team for further advice.
Permagard have comprehensive guides, mixing videos and more to help confident DIYers transform spaces with epoxy flooring.
Epoxy Garage Floor Kit contains:
If you are looking to create a DIY epoxy floor then our kit is ideal. It contains all of the key components required as well as an epoxy that is easy to apply and fast-drying.
- 1 x Epoxy Resin Floor Coating Grey 5kg
- 1 x Epoxy Resin Floor Coating Grey High Build 5kg
- 1 x Mixing Paddle
- 1 x Harris 3 Section Aluminium Extension pole
- 1 x Harris 12" Epoxy Roller Frame
- 2 x 12" Medium Roller Sleeve
- 1 x Disposable 3 Brush Pack
- 1 x 12" Roller Tray
Note: All Permagard epoxy flooring products are professional grade. This means your floor coating will be highly durable, long-lasting and up to 5x thicker than standard garage floor paints available from hardware stores.
Our epoxy floor coating kits can be used on concrete floors in many spaces including the following areas:
- Man caves
- Vehicle storage units
- Commercial spaces
- Animal kennels
- Warehouse floors
- Industrial kitchens
Garage Floor Epoxy Kit
Our kit contains all you need to install an epoxy garage floor. One of the most popular applications for our kits is garage flooring and it’s easy to see why. The gloss finish, resistance to oils and other chemicals, and hard-wearing nature make it a great option. If you have any questions about using it as a garage floor paint kit then get in touch with our experts.
Installing an epoxy garage floor
Clean the floor thoroughly to remove dust, oil and grease as these can all reduce the bond.
With new concrete floors, it is essential to remove any laitance – this refers to the fine particles that accumulate on the surface of all new concrete floors and screeds to form a crust. You should do this by mechanical means such as a surface scrabbler, grinder or with grit blasting. Please speak with a technical advisor if unsure.
You will need the following tools and accessories:
- Drill with a 10mm chuck for the mixing paddle for mixing the epoxy
- Masking tape for non-target areas (skirting boards etc.)
- Gloves, coveralls, googles
Special primers will be required for surfaces that are exhibiting the following:
- Weak, dusting or flakey
- Oil or grease contamination
If your floor has any of the above please speak with our technical team.
Epoxy floor coatings are supplied in two components, the harder and the base. It is essential that you match the hardener and the base from the same product.
Once the floor is clean and if necessary primed, get the Epoxy Floor Coating Hardener and Base and remove the lids. Then carefully mix both components in their own tins, once the mix is streak free and the colour is uniform mix both components together either in the larger epoxy container or in a bucket for at least two minutes until the mix is uniform and streak free.
Apply the Epoxy Floor Paint to the edges by brush and roller the main surface. You have a pot life of approx 30-40 minutes depending on the temperature. For drying make sure adequate ventilation is available and the area will not get moist during the drying phase (Garage shutter areas). If this happens the coating may appear dull and discolored.
Two coats are required for the best results. Allow at least 24 hours to dry between coats but no more than 48 hours.
Then repeat the process with the Epoxy Floor Coating HB as a top coat and allow it to fully dry for 24 hours (foot traffic). Please note we do not suggest vehicle traffic is applied over the coating for at least 72 hours.
Read more detailed instructions in our guide to laying epoxy flooring.
Permagard – Providing solutions. Inspiring confidence.
Permagard are specialists in epoxy flooring and epoxy damp proof membranes – we have been selling epoxy flooring supplies for many years. If you have any questions about the floor coating, our epoxy floor kit or concrete floor coatings in general contact our team of experts on 0117 982 3282.
- Ideal for laying an epoxy floor in a garage
- All you need in one convenient kit
- High quality, long lasting and durable epoxy resin
- Showroom gloss finish which is hard wearing
- Easy to use, simply brush or roller apply
- 5 x thicker than commonly available floor paints
|Packaging:||as a kit|
|Dilution:||two component epoxy resins|
|Coverage:||3m x 6m floor (standard single garage) - Up to 20m²|
|Country of Manufacture:||United Kingdom|