PermaSEAL Plaster Plugs 70mm Bag of 250

Plaster Plugs

PermaSEAL Plaster Plugs are used above ground to fix any PermaSEAL Mesh membranes to the substrate either internally or externally.

To fix the membrane use a 8mm SDS drill bit and drill through the membrane into the substrate prior to hammering home the plaster plug. PermaSEAL Plaster Plugs should be fixed at maximum centres of 250mm internally or 150mm centres externally.

Internally on a mesh membrane you should use 15 plugs per m².
Externally on a mesh membrane you should use 30 plugs per m².

For above ground waterproofing use mastic to seal behind the plugs before hammering home.
For below ground waterproofing wrap PermaSEAL rope around the head before hammering home to form a water tight seal.