Wykamol CM Plaster Plugs with Seals (Pack of 100)

Wykamol CM Plaster Plugs with Seals (Pack of 100)

Wykamol CM Plaster Plugs with Seals (formerly Triton Plaster Plugs with Seals Bag of 100) are used above or below ground to fix mesh cavity drain membranes securely to the substrate.

How to Use Wykamol CM Plaster Plugs

To fix the membrane, use a 7mm or 8mm SDS drill bit. Drill through the membrane into the substrate before hammering the plaster plug into place. Plugs should be fixed at maximum centres of 250mm internally, with closer spacing at corners.

When installing mesh membranes internally, use approximately 15 plugs per m².

• Above Ground
  Use the pre-fitted seal supplied on the plug.
• Below Ground
  For waterproofing applications, use the pre-fitted seal or apply a bead of Wykamol Sealing Rope around the plug head before fixing to form a watertight compression seal. Sealing rope should be used in vaulted ceilings.

For use with Wykamol CM8 Plaster Mesh Membrane.

Correct fixing density and sealing are important for reliable cavity drain membrane installations. If you would like to check fixing centres, substrate suitability or sealing options, Permagard’s technical team can help. Call 0117 982 3282 for free technical advice.

Browse our range of membrane fixing plugs.