Newton HydroBond 2K-Flex Primer 10L
Quick-drying Newton bitumen emulsion primer for use with Newton HydroBond 2K-Flex.
Newton HydroBond 2K-Flex Primer is a black, bitumen primer liquid. It is designed for the external waterproofing of retained structures when used in conjunction with Newton HydroBond 2K-Flex. It is highly effective at lowering porosity of concrete and masonry substrates.
This bitumen primer adheres well to concrete, masonry, plaster and other common construction substrates. It can also be used as a primer for horizontal surfaces prior to cold-applied, seamless rubber waterproofing membranes.
- HydroBond 2K-Flex Mesh
- HydroBond 2K-Flex Bitumen Coating
Important note: Not to be used on ICF structures.
Applying HydroBond 2K-Flex Primer
The Newton HydroBond 2K-Flex Primer comes ready to use and is easy to apply. Start by making sure the substrate is clean, and any cracks and holes are repaired. Simply stir briefly then brush or roller the bitumen primer onto the prepared substrate. Once it has fully dried, you can apply the Newton HydroBond 2K-Flex bitumen waterproof coating as per manufacturer’s instructions.
Permagard - Newton HydroBond 2K-Flex suppliers
- Ready to use
- Fast drying bitumen primer
- Apply by brush or roller
- Solvent free
- Improves bond of HydroBond 2K-Flex
- Reduces porosity of concrete and masonry substrates
|Dilution:||Ready to use|
|Coverage:||Approx. 200 ml/m² depending on the porosity of the substrate. 50m² per unit.|
|Country of Manufacture:||United Kingdom|
Need more information?
Thank you for leaving a review on this product!
If you need more help, check out the downloads for more product information, or our fantastic Help & Advice centre!
Review this product
Share your thoughts about this product with other customers, write a review.
- HydroBond 2K Flex Primer Safety Data Sheet (295.6 KB)