Newton Multi Plugs Bag of 100
Newton MultiPlug has been engineered to give a better fix in questionable substrate. It has the added benefit of having a rubber sealing grommet supplied with the plug.
Newton Membrane Fixing Plug
The Newton MultiPlug has been designed for use with any of the Newton Membranes in its range but it is generally specified in combination with the 8mm clear or 8mm meshed membranes for basement waterproofing. The 10mm x 60mm Multiplug comes complete with a fitted rubber sealing grommet which when fitted into the wall is expanded by the plug head creating a compressed seal against the membrane stopping any water or damp ingress through the plug hole. These Newton membrane fixing plugs are pre-drilled to accept a size 10 (5mm) self-tapping screw for the fixing of battens or other dry-lining systems.
The Newton MultiPlug is generally fitted at 250mm centres on meshed membranes (15 plugs per m²) or on clear membranes approximately 5 plugs per m².
Permagard - Providing Solutions. Inspiring Confidence.
Permagard are proud to stock a wide range of Newton membranes and waterproofing products. If you have any questions about Newton products, or if we can help in any other way, please contact our technical team on 0117 982 3282.
- Quick fixing self sealing plug
- Can be used in questionable substrates
- Can be used on both clear and meshed membranes
- Manufactured in the UK
- Part of the Newton 500 system
|Packaging:||Bag of 100|
|Size:||10mm x 60mm|
|Coverage:||15 plugs per m² meshed membranes, 5 plugs per m² clear membranes|
Certification No: 94/3010
Approved by the British Board of Agreement
|Country of Manufacture:||United Kingdom|
Need more information?
Thank you for leaving a review on this product!
If you need more help, check out the downloads for more product information, or our fantastic Help & Advice centre!
Review this product
Share your thoughts about this product with other customers, write a review.
What size drill bit do I need for the Newton Multi Plug?
We suggest a 10mm drill bit at least 60mm in length.
- Newton 500 Ancillaries Data Sheet (1,014.0 KB)