Damp Proofing Injection Kit from Aida
This damp proofing injection kit contains all you need to damp proof up to 20m of 9" wall. This includes a Pro Injection Gun with injection nozzle and 4 x 1 litre cartridges of Aida injection Cream.
The Aida DPC cream is a highly effective cream emulsion on a silane/siloxane base. Its unique formulation allows superior penetration of the active ingredient within the building material, which creates a damp proof course in walls above ground level where an existing DPC has broken down or an orthodox DPC is missing.
Aida Injection Cream is quick and easy to install by a low pressure injection system and is regarded as the easy way to treat rising damp.
When injected into masonry, Aida Injection Cream reverts to a liquid phase resulting in complete absorption of the product providing superior penetration and effective damp proof coursing.
This Dampproofing kit from Aida includes:
- 4 x 1 Litre Aida Damp Proofing Cream Cartridges
- 1 x 1 Litre Cartridge Gun
- 1 x 1 Litre Cartridge Nozzle and Lance
- 1 x 12mm x 300mm SDS Drill Bit
Pure Cream Technology offers you the following distinct advantages:
Superior performance with long lasting deep penetration of active ingredient within the building material.
Optimal penetration of the active ingredient allows the usage of lower and more economic concentrations in contrast to commonly available paste products.
The unique consistency of pure cream provides superior stability in the borehole ensuring the optimal penetration of the active ingredient in all directions.
Ease of application allowing simple loading of application guns or application by low pressure sprayer.
Application Rates/ Requirements:
|Application rate per 10m wall length||0.9
This kit will treat up to 20m of 9" wall or 40m of 4 1/2" wall
Please note these application rates are for a guide only. Application rates for porous, rubble or highly absorbent masonry may vary.
As with all Damp Proof Course Injections salt contaminated plasterwork must be renewed. It is important that the re-plastering specification is strictly adhered to and that the plasterer carrying out the work is made aware of the importance of the re-plastering being carried out to specification in conjunction with the insertion of the new chemical damp proof course. Please ask for our recommended re-plastering specification or read our guide on how to replaster after a new DPC.
- Quick and easy to install
- Effective & Safe Protection against Rising Damp
- Does not form salts
- Independent research & tests have proven effectiveness
- Solvent free (VOC free)
- Long lasting and deep penetration of the mortar layer
- Controllable and Consistent Consumption Rates
- Environmentally-friendly, ecologically safe and non-hazardous
- Suitable for alkaline, pH neutral & acidic building materials
|Packaging:||as a kit|
|Size:||4 x 1 litre cartridges|
|Dilution:||ready to use|
|Coverage:||20m of 9 inch wall or 40m of 41/2 inch wall|
|Country of Manufacture:||Germany|