Damp proof membrane kit for isolating damp walls above ground and providing a key for a range of finishes.
Platon Damp Proof Membrane Kit – 1m x 10m
This tough but pliable Isola Platon Mesh Membrane is manufactured from polypropylene (PP) and is designed to be applied to internal walls to protect against damp and the reappearance of salts. The membrane is impermeable and resistant to moisture. It can also be installed straight away after the injection of a new damp proof course, dramatically reducing the project time.
One side of the membrane features 2.5mm studs located at 25mm centres in a regular pattern in both directions. The integrated polypropylene mesh on the other side provides a firm key for new finishes such as render or dot and dab.
This is a 10 square metre roll at 1 metre high and 10 metres long. It comes as part of kit.
The damp proofing membrane Kit includes:
- 1 x Roll of Platon PB2 1m x 10m 2.5mm Meshed Membrane (10m²)
- 1 x PermaSEAL Plaster Plugs 60mm (200)
- 1 x PermaSEAL Sealing Washers (200)
- 1 x 8mm x 160mm Drill Bit
Installation
Once a new injection damp proof course has been injected, you can simply apply the Platon mesh membrane to the walls affected. You then have the option to either dot and dab or render directly to it. The mesh membrane can be cut to length with a sharp knife or scissors. It is easy to bend around corners.
Features
- All you need in one damp proof mesh membrane kit
- Tough but pliable damp proof membrane
- Life expectancy of at least 50 years
- Easy to cut with a knife or scissors
- Resistant to all chemicals usually encountered in building construction
- Minimal disturbance and preparation to existing substrate
Platon PB2 Damp Proof Membrane Kit 40m²
Platon PB2 Damp Proof Membrane Kit 20m²
