Epoxy Flooring High Build
Permagard Epoxy Resin Floor Coating HB is a two-pack solvent free, high build epoxy resin coating. It is designed as a heavy duty coating at a thickness from 200 to 500 microns. The coloured high gloss finish is extremely hard wearing and has good general chemical resistance.
Permagard Epoxy Floor Coating HB has a low-odour during application and provides a sealed, continuous and hygienic floor surface when cured. This epoxy floor coating is easily applied and provides a tough, resilient, corrosion and abrasion-resistant finish. Anti-slip finishes can be achieved by the inclusion of aggregates.
The HB (high build) version of Permagard Epoxy Resin Floor Coating has a higher solid content level than our standard Epoxy Resin Floor Coating. When applied to a surface, this provides a dry coat thickness of nearly four times the thickness of the standard product. This provides a more substantial coating on the surface, creating a tough, resilient, corrosion and abrasion resistant finish.
Permagard Epoxy Resin Floor Coating HB is ideal for use in the food industry such as dairies, breweries and bakeries where solvent based products are prohibited. The hard-wearing, chemical / oil resistant properties also make Permagard Epoxy Resin Floor Coating HB ideal for:
- Automotive workshops
- Supermarkets ( back of house areas )
- General industrial usage
Installing Epoxy Floor Coatings
Preparing the floor correctly is essential to the success of this epoxy HB. This product should not be used on surfaces contaminated with oils, greases and other chemical surface contaminants. If your surface has surface contaminants like the ones mentioned please use FAS Primer or seek our help.
As with all coloured epoxy floor coatings, two coats are advised for the best coverage and colour results. Always use the correct primer if required. Allow at least 12 hours to dry between coats. No more than 48 hours.
It is essential to remove any laitance by mechanical means (common on new concrete floors/screeds). Please speak with one of our technical team if unsure. This product is not suitable for external application and is not UV light stable so th epoxy can yellow over longer or intense periods of sunlight.
Permagard - Providing Solutions. Inspiring Confidence.
If you have any questions about what epoxy floor coating is best for your situation or how to apply Epoxy HB Floor Coating then contact us on 0117 982 3282. We have also created guides on applying an epoxy floor as well as one on installing an epoxy garage floor.
- High build coating up to 4 times thicker than standard epoxy floor coatings
- Ventilation for solvent evaporation is not essential for Permagard Epoxy Resin Floor Coating HB
- Hygienic and easy to clean and maintain
- Good colour stability
- Suitable for application where a bacteria-free finish is important
- Aggregates can be incorporated for improved slip and abrasion resistance and wearing properties
- Excellent high gloss finish
- No shrinkage on curing
|Size:||5 kilo total twin component containers|
|Dilution:||mix two components|
|Coverage:||0.25 kg / m² approx 20m² per 5kg|
|Country of Manufacture:||United Kingdom|
Need more information?
Thank you for leaving a review on this product!
If you need more help, check out the downloads for more product information, or our fantastic Help & Advice centre!
Review this product
Share your thoughts about this product with other customers, write a review.