• 1-3 Days Delivery
  • Low Trade Prices
  • Free Technical Advice

PermaSEAL PRO MP 2C - Multipurpose Waterproofing 12.5kg

£86.00 Ex VAT
£103.20 Inc VAT
 
Ideal for smaller waterproofing projects and detailing work, the 12.5kg MP 2C can be mixed as two separate 6.25kg batches, reducing material wastage.

Versatile Waterproofing in Two Convenient Batches

PermaSEAL PRO MP 2C is a versatile, two-component, polymer-modified waterproof coating. The 12.5kg pack gives you the option to prepare half the contents at a time, making it a practical choice for smaller waterproofing projects where the full quantity isn't required.

Flexible, bitumen-free and easy to work with, MP 2C provides a protective waterproof coating on suitably prepared surfaces. Each 12.5kg pack contains two bags of powder and one bottle of liquid, allowing you to mix one powder bag with half the liquid for smaller sections or detailing work, while keeping the remaining components unmixed until required.

MP 2C for smaller waterproofing projects

Not every waterproofing job requires a large quantity of material. Whether you're working on a smaller section of masonry, waterproofing a plinth or applying a protective coating around detailed areas, you can prepare one batch at a time instead of mixing the full 12.5kg.

By keeping the second bag of powder and remaining liquid unmixed until needed, the 12.5kg pack is particularly useful for work completed in stages, such as applying a second coat or waterproofing another area. This can also help minimise wasted material, provided the remaining components are stored correctly.

Uses of MP 2C 12.5kg

PermaSEAL PRO MP 2C 12.5kg is ideal for smaller scale waterproofing and detailing work. It can form part of numerous waterproofing systems depending on requirements. Potential applications include:

  • Waterproofing smaller areas of prepared concrete, brickwork and masonry
  • Plinth waterproofing and protection against splashback
  • Detailing around corners, edges and wall-to-floor junctions
  • Selected areas of basement walls and foundations
  • Waterproofing projects where a smaller quantity of material is required

Where additional reinforcement is required around corners or junctions, PermaSEAL PRO Flexible Jointing Tape should be embedded into the first coat of MP 2C.

How to Apply MP 2C 12.5kg

MP 2C is easy to apply using a brush or trowel. This allows for more control when applying across smaller areas and detailed surfaces. Correct substrate preparation and application thickness are essential to its performance. Please refer to the Technical Data Sheet in the Downloads section for full preparation and application instructions.

Preparation

Ensure the substrate is clean, sound and free from dust, loose material, laitance and any coatings that could affect adhesion. Repair any defects or voids before waterproofing and ensure that active water ingress has been addressed.

Surface preparation requirements will depend on the condition and type of substrate. If you are unsure whether your surface is suitable, contact our technical team before proceeding.

Mixing

MP 2C 12.5kg is supplied with two bags of powder and one bottle of liquid. To prepare a 6.25kg batch, accurately measure out half the liquid by weight and mix it with one complete bag of powder, following the product instructions for mixing method and working time.

The second bag of powder and remaining liquid can be kept unmixed and stored as directed until needed for a second coat or another application. Once mixed, the material must be used within its specified working time.

Application

Apply the mixed coating evenly using a suitable brush or trowel. Pay close attention to the required coating thickness and number of coats for the intended application. Allow approximately 2–3 hours between coats, depending on temperature and conditions. The coating changes from light grey to dark grey as it sets, indicating when the next coat can be applied.

Protect the coating during curing and follow the product-specific technical guidance for application conditions, coverage and drying times.

Choosing the right size MP 2C

The option to prepare the 12.5kg product in two separate batches makes it particularly convenient for smaller areas, detailing work and projects completed in stages. For larger surfaces or projects requiring greater quantities of material, our PermaSEAL PRO MP 2C 20kg may be a more practical choice.

Whichever size you're considering, it's important to calculate the quantity required using the appropriate coverage rate and coating thickness for your project.

PermaSEAL - Complete Solutions. Made Possible.

If you're unsure which MP 2C size is best for your project, or need guidance on substrate preparation, coverage or application, our technical team is here to help. Call 0117 982 3282 for free expert advice.

Further reading

For more information about structural waterproofing, read our guide to external waterproofing, or discover how to waterproof foundation walls.

Features

  • Radon-proof and bitumen free
  • Highly flexible and crack bridging
  • Ideal for smaller areas and detailing work
  • High resistance to UV, frost and ageing
  • Suitable for brush or trowel application
  • Can be mixed as two separate 6.25kg batches
  • Helps minimise wastage by leaving the second batch unmixed until needed
Other Products You May Be Interested In