Newton 803 Clear Membrane 40m²
Clear Damp Proofing Membrane - 40m²
Newton 803 Clear is a low profile damp proofing membrane to be used in situations where the finishes required are plaster board on timber batten or independent metal or timber frame work systems.
This clear membrane is light weight, pliable and easy to bend around corners or protrusions. Newton 803 Clear creates a physical barrier between damp salt contaminated walls and clean dry internal surfaces.
Installing Clear Membranes
To fix the system to the wall either use Newton self-sealing Multi Plugs which can then be fixed into with a screw (for fixing battens or metal track systems) or Newton 800 mesh plugs primed with Newton Mastic to hold the membrane against the wall then a free standing wall to be constructed in front of the membrane.
Above ground, the system can be butt jointed (like wall paper) then over sealed with PermaSEAL Fleece Strip or Newton Corner Strip.
Newton 803 is light, clean and easy to handle. It can be cut with a sharp knife, scissors or shears.
Permagard - Providing Solutions. Inspiring Confidence.
Permagard are proud to stock a wide range of Newton membranes and waterproofing products. If you have any questions about Newton products, or if we can help in any other way, please contact our technical team on 0117 982 3282.
- Easy to handle – bendable around corners & protrusions
- Can be cut with a sharp knife, scissors or shears
|Size:||2m x 20m (40m²) x 3mm|
Certification No: 94/3010
Approved by the British Board of Agreement
|Country of Manufacture:||United Kingdom|
Need more information?
Thank you for leaving a review on this product!
If you need more help, check out the downloads for more product information, or our fantastic Help & Advice centre!
Review this product
Share your thoughts about this product with other customers, write a review.