PermaSEAL 3 Eco Floor Tanking Membrane 40m²
Recycled 3mm Floor Membrane
PermaSEAL 3 Eco Floor is a high quality, slimline floor tanking membrane manufactured from 100% recycled HDPE. It can be used for damp proofing floors in new or existing buildings. Our floor membrane is used above ground, over a contaminated or damp background before flooring systems are installed. The recycled membrane’s 3mm stud profile provides a small air gap above the floor for moisture movement and evaporation with minimal impact on the end floor finish level.
Our recycled 3mm Eco Floor Tanking Membrane can be used in the following applications:
- Above ground damp proofing of floors in renovations
- Isolation of new “green” concrete from floor finishes
- Isolation of contaminated floors above ground level
Note: All floor membranes should be permanently protected against UV Light. Failure to do this will dramatically decrease the service life of the product.
Benefits of PermaSEAL 3 Eco Floor Membrane
The PermaSEAL 3 Eco Floor membrane delivers many benefits.
Whilst being made from 100% recycled raw material, PermaSEAL 3 Eco Floor is still manufactured with performance in mind. It is made to a higher density than other membranes in its class which increases its compressive loading stability. This makes it ideal for flooring applications. It is guaranteed for 30 years and has a life expectancy of at least 50 years (DIN 9001:2000). As an inert product, the Eco membrane is highly resistant to water and a range of contaminants. It’s easy to install too – you can even cut the membrane to size using scissors.
Environmentally friendly floor membranes - how and why it matters
Part of Permagard’s mission is to provide our clients with quality recycled products wherever possible. By using recycled plastic, we save resources, water, time, energy, and reduce emissions. It also stops the plastic used in our Eco membranes going straight to landfill. In addition, any unused membrane can be recycled again as HDPE can be recycled up to 10 times!
The Eco Floor Membrane is a premium quality product that is better for the environment. It is manufactured from recycled HDPE from sources such as:
- Milk bottles
- Shampoo and detergent bottles
- Plastic carrier bags
- Food containers
- Pipes and pipe fittings
- Plastic trays
- IBC containers
- Wheelie bins
Installing PermaSEAL Eco Floor Membrane
The membrane is simply unrolled to the edge of the floor. The next sheet is then run alongside the first piece. Place the non-studded flange over the top of the previous sheet to create an overlap joint. This joint is now sealed with PermaSEAL Overtape to stop moisture and vapour permeating to the floor finish.
Once the Eco Floor Tanking membrane has been installed, you need to protect it. It can accommodate insulation, underfloor heating, screed and floating floors.
PermaSEAL - Complete Solutions. Made Possible.
You can use our PermaSEAL3 Eco Floor Membrane safe in the knowledge that you are doing your bit for the environment whilst guaranteeing the highest quality product. If you have any questions about installing PermaSEAL damp proofing membranes or damp proofing in general our experts are on hand to provide free advice. Simply call us on 0117 982 3282.
- Made from 100% recycled materials
- High compressive loading stability
- Highly resistant to water, alkalis, saline solutions and organic acids and is not affected by minerals
- Resistant to bacteria, fungi, and other small organisms
|Size:||2m x 20m (40m²)|
|Coverage:||Up to 40m² (2m x 20m) depending on joints|
|Country of Manufacture:||United Kingdom|
Need more information?
Thank you for leaving a review on this product!
If you need more help, check out the downloads for more product information, or our fantastic Help & Advice centre!
Review this product
Share your thoughts about this product with other customers, write a review.
Anti Mould Treatments
At Permagard, we stock professional anti mould products formulated to keep walls and ceilings free from mould and mildew.
PermaPROTECT Range - Lasting Solutions. Proven Protection
Permagard developed our PermaPROTECT range of anti mould treatments to provide people with lasting solutions to mould issues. We understand the stress that mould can cause, from the potential health risks to its unattractive appearance and the damage it can cause to decoration. That’s why we developed easy-to-use products based on proven biocides.
Note: All PermaPROTECT products are HSE-approved and conform with COPR (Control of Pesticides Regulations). This provides peace of mind that the contained biocides are approved for use and safely incorporated into our products.
Our Anti Mould Products
PermaPROTECT Anti Mould Paint - specially formulated to protect surfaces against black mould, even in rooms where there is persistent condensation. It contains powerful biocides that stop mould growth for up to five years. Easy to use and provides a high-quality, durable finish.
Note: Anti Mould Paint does not stop condensation but instead prevents the negative effects of condensation like the formation of black mould and mildew. The best way to cure condensation is by improving ventilation in the affected area.
PermaPROTECT Anti Mould Paint Additives - opening up more colour options to you, these additives can be added to both emulsion paint and acrylic paint. You can also add to wallpaper paste and tile grouts to provide protection against the effects of condensation.
PermaPROTECT Anti-Condensation Paint - apply to internal surfaces to prevent condensation. It works by raising the surface temperature of your internal walls to change the dew point - the temperature at which moisture forms on a surface. Condensation takes up to 60% longer to form, providing protection from damp and mould.
Mould Control - getting rid of mould and mildew
Black mould and mildew are unsightly and can ruin the appearance of a room. You can quickly get rid of both with our specialist mould removal products:
PermaPROTECT Mould Wash Concentrate - fungicidal mould wash that’s highly effective at getting rid of mould and mildew. Recommended before the application of any of the above anti condensation products to ensure that the surface is free from mould.
PermaPROTECT Mould Removal Kit - all you need to remove mould from walls and ceilings in one convenient kit, including mould wash concentrate and anti mould paint additive.
PermaPROTECT Mould Resistant Paint - Designed to prevent black mould growth for five years, even in areas of high humidity like bathrooms and kitchens. It comes in brilliant white or magnolia, drying to a premium matt finish.
Permagard – Anti-Mould Experts
If you have any questions about mould control or any of our anti mould treatments then contact our team today. For more information read our internal damp guide or our how to remove mould guide. If you have a condensation problem then you may want to consider ventilation options.