Designed for waterproofing basements, tanks and ducts, blocking water ingress both internally and externally on concrete, brickwork and blockwork.
White Tanking Slurry
PermaSEAL Tanking Slurry is a single pack cement-based coating, consisting of Portland Cements, blended and formulated with quality graded aggregates and chemical modifiers. It is ideal for tanking cellars and basements, keeping them dry by effectively blocking water ingress. Our White Tanking Slurry is easy to use - you can apply it directly onto damp substrates with a brush.
In addition, PermaSEAL Tanking Slurry contains an acrylic polymer that imparts improved strength, bonding and abrasion resistance. After hardening, PermaSEAL tanking becomes a vapour permeable and watertight coating capable of withstanding water pressure.
Tanking Slurry Uses
PermaSEAL Tanking Slurry in white can be used in the following situations:
- Tanking of basements and cellars
- Above ground damp proofing
- Sealing of tanks and ducts
- Internal and external waterproofing
- Lining of storage tanks for potable water
- Coating of brick and block work structures
Using Tanking Slurry
PermaSEAL cementitious tanking is mixed with water on site and applied directly to the surface by brush. It is safe to apply on damp substrates. It is specially formulated to enable excellent adhesion to construction surfaces.
Our tanking slurry is available in two colours, white and grey. As a general guide, use one colour for the first coat then the other for the second coat which makes it easier to see if you have completely covered the surface.
Once tanking is complete…
PermaSEAL Tanking should always be covered by a minimum of a 10mm coat of 4:1 sand and cement render, a 1:1:6 Lime based render or PermaSEAL Renovating Plaster. After this render coat has been applied, dot and dab plaster board, multi finish or a breathable paint can be applied.
Note: all tanking products are prone to sweating during the drying out phase and if left exposed after the product has cured. We suggest they are always covered as above and/or adequate ventilation is installed to manage the humidity.
PermaSEAL - Complete Solutions. Made Possible.
Permagard offer a range of high quality tanking products to meet your precise needs - everything from cementitious tanking to fillet seal to crystalline tanking slurry. If you need advice on choosing the right tanking product or basement waterproofing system contact our expert team.
- Excellent adhesion to prepared surfaces
- White tanking slurry to differentiate coats
- Easy to apply by brush or spray
- Microporous (fully breathable)
- Can be pressure cleaned
|Packaging:||Loose powder in bucket|
|Size:||20 kilo bucket|
|Dilution:||The liquid demand is 6.5 litres of water per 20kg bucket|
|Coverage:||Coarse surface: 2.5kg to 3kg/m²/coat 6.5 to 8m² per 20 kg unit/ coat. Smooth surface: 2kg to 2.5kg/m²/coat 8 to 10m² per 20 kg unit/ coat. 2 coats always required.|
|Country of Manufacture:||United Kingdom|
Need more information?
Thank you for leaving a review on this product!
If you need more help, check out the downloads for more product information, or our fantastic Help & Advice centre!
Review this product
Share your thoughts about this product with other customers, write a review.
Can PermaSEAL Tanking Slurry be applied to painted cellar walls?
No, PermaSEAL Tanking Slurry must be applied to the clean masonry substrate. All paint and previous coatings must be removed and the masonry substrate made good before the tanking slurry can be applied.
Can PermaSEAL Tanking Slurry be applied on breeze block walls?
Yes however you must apply a thin render to the block first to fill any air holes or indentations so the tanking can create a waterproof seal. If this is not applied air holes can form through the tanking slurry allowing water to pass through the coating.
Can PermaSEAL Tanking Slurry be applied over old bitumen?
No, it needs to be applied to a sound clean masonry background. If you cannot remove the bitumen we suggest the use of Multi Tight 2K as this will adhere to sound bitumen on floors and walls.